Table of Contents
Advertisement
8/11/22, 2:30 PM
Startup Checklist
Startup Checklist:
Has air been purged from binder line? (1 print)
Ensure the Deck, Fast axis and Build bed are clean of Core or other contaminants
Ensure the debris separator is empty
Ensure the carriage and rails are clean
Ensure the service station is clean
After emptying it of any remaining Core, raise the build platform to the top of the build bed
Ensure there is nothing inside the printer that will obstruct the fast axis as it moves (especially
the vacuum hose – rotate it out of the way if necessary)
infocenter.3dsystems.com/projetcjpx60/print/book/export/html/861
Quick Start Guide
st
8/14
Advertisement
Table of Contents
