8/11/22, 2:30 PM
Power Supply
Verify facility's electrical service rating before connecting power to the printer.
Electrical Requirement:
Printer in operation
100-120V~, 50-60 Hz, 5.5 Amps.
230V~, 50-60 Hz, 2.75 Amps.
Printer in Sleep Mode - 48 W
100-120V~, 50-60 Hz, 0.4 Amps.
230V~, 50-60 Hz, 0.2 Amps.
1. Plug power cord into power outlet
(located at the backside of printer) and into
facility's power outlet.
2. Plug one end of the Ethernet cable into
Ethernet port
PC's network port.
3. Switch power on
infocenter.3dsystems.com/projetcjpx60/print/book/export/html/861
(A)
(B)
and the other end into your
(C)
Quick Start Guide
4/14