Advertisement
1853104
Emissary Media Storage
Parts required
A. Top Assembly
B. Side Panels
C. Bottom Panel
D. Feet
H. Connecting Bolts
1. Attach Bottom Panel (C) Align the pre-drilled holes on the bottom of the Side Panels (B) with the exposed dowels
on the Bottom Panel (C). Ensure that the rows of pre-drilled holes on the side surface of the Side Panels face inward
and the notched edges face the back. Secure with Confirmat Screws (L) using the Allen Head Wrench (J). Do not
fully tighten at this point.
2. Attach Feet (D) Insert the exposed threads of the Feet (D) into the holes on the metal plates on the bottom of the
Bottom Panel (C). Turn in a clockwise direction.
3. Attach Top Assembly (A) Screw the Connecting Bolts (H) into the pre-threaded inserts in the Top Assembly (A).
Insert the Eccentric Cams (I) into the two bigger pre-drilled holes on the side surface of one of the Side Panels (B).
Make sure the "X" is facing out and the arrow points toward the pre-drilled holes at the edge of the Side Panel (B).
Repeat to insert the remaining Eccentric Cams (I) into the other Side Panel (B). Align the pre-drilled holes on the
edge of the Side Panels (B) over the Connecting Bolts (H). Secure in place by turning the Eccentric Cams (I) in a
clockwise direction using the Allen Head Wrench (J). Cover the Eccentric Cams (I) with Plastic Caps (K). Now
tighten all the Confirmat Screws (L). See illustration #1.
Illustration #1
Page 3 of 6
Attach Feet, Top and Bottom Panels
1 pc
I.
2 pcs
J.
1 pc
K.
4 pcs
L.
4 pcs
H.
A.
I.
J.
K.
A.
B.
Eccentric Cams
Allen Head Wrench
Plastic Caps
Confirmat Screws
B.
C.
B.
C.
D.
D.
4 pcs
1 pc
4 pcs
4 pcs
L.
J.
D.
D.
R1-3-15-2004
Advertisement
