Bayer HealthCare Ascensia DEX2 User Manual page 23

Perform a control test
The following steps tell you how to check that your
system is working correctly. You will need a bottle of
control solution and the test strip disc carton. If you
would like to perform a control test, please call Bayer
Customer Service at 1-800-348-8100 to get your first
bottle of control solution at no charge.
1. In a single motion, move
the pad all the way to the
left and then move the
slide forward. Be sure
slide is moved all the
way to the end. This will
push out a test strip.
Important:
You must move the slide
all the way forward.
2. A flashing blood drop
appears on the display.
The meter is ready for
the control solution.
It will stay ready for 15
minutes, then turn
itself off.
3. Squeeze a small drop of
control solution on a
clean surface.
16