Audi TT 2019 Owner's Manual page 83

i
Note
After the engine is stopped, the radiator fan
may remain on or turn itself back on for up to
10 minutes, even if the ignition is switched
off.
Driver messages
Pressing start/stop button again will switch off
engine
This message appears if you press the
I
START ENGIN E STOPI
moving.
Engine start system: fault. Please contact work­
shop
A fault has occurred when starting the engine au­
tomatically (automatic start function). Drive to a
qualified workshop soon and have the fault recti­
fied. Pre.ss and hold the
button to start the engine.
II
Remote control key: hold back of key
against marked area. See owner's manual
This message appears if there is no convenience
key inside the vehicle or if the system cannot de­
tect or identify the key. This can happen, for ex­
ample, if the radio signal from the key is
by a metal briefcase or similar, or if the key
ted
battery is weak. Electronic equipment, such as
mobile phones, can also interfere with the radio
signal from the key.
The engine can still be started or stopped if this
happens (please refer to
the engine after a malfunction).
Ill
Remote control key: key not recognised. Is
key still in vehicle?
If the indicator lamp
sage appears, the convenience key was removed
from the vehicle while the engine was running. If
the convenience key is not in the vehicle you will
not be able to switch on the ignition or restart
the engine after it has been switched off. You will
�
also not be able to lock the vehicle from the aut­
o
� side.
N
.--t
0
Please press brake pedal
�
button while the vehicle is
I
START STOPI
ENGINE
obstruc­
page 81, Starting
q
fll
lights up and the mes­
This message appears if you try to start the en­
gine without first pressing the brake pedal.
Please press clutch pedal
This message appears on vehicles with a manual
gearbox if you try to start the engine without
first pressing the clutch pedal. The engine will
only start if you press the clutch pedal.
Please engage N or P
This message will appear if you try to start or
switch off the engine when the selector lever is
not in Nor P. The engine can then not be started
or switched off.
Starting the engine after a malfunction
If the remote control key battery is exhausted or
if radio interference or a system malfunction
curs, extra steps may be necessary in order to
start the engine.
Fig. 91
Steering column/remote control key: Starting the
engine after a malfunction
If the message y > l) Remote control key: hold back
of key against marked area. See owner's manual
is displayed, you can still start the engine man­
ually.
Manual gearbox: Press the clutch pedal.
►
Automatic gearbox: Press the brake pedal.
►
I
Press the
START
ENGINE
►
Hold the remote control key against the symbol
►
y>l ) as shown in the illustration. The
qFig. 91,
engine should start.
If the engine does not start automatically,
►
press the
I START
E NGIN E
Driving
oc­
button.
STOPI
button again.
►
STOPI
81