System Settings; Setting The Time And Date; Mmi Settings - Audi TT 2019 Owner's Manual

System settings

System settings
Setting the time and
date
The time can be set manually or via GPS:
I I
► Select: MENU button >Settings> left control
button > MMI settings > Date & time, or:
I I
button >Car> left control but-
► Select: MENU
ton > Vehicle settings> Date & time.
Set automatically
The time and date are automatically updated
when this function is switched on�-
Time
Important: The Set automatically function must
be deactivated.
Press the rotary pushbutton. You can adjust the
time manually by turning and pressing the rotary
push button.
Date
Important: The Set automatically function must
be deactivated.
Press the rotary pushbutton. You can adjust the
date manually by turning and pressing the rotary
push button.
Time zone
When selecting the correct time zone, a list of
corresponding countries is displayed as an exam­
ple.
Automatic time zone*
When this function is activated�, the time is au­
tomatically adjusted to the relevant time zone.
Time format
When this option is set to
13:00 will be displayed as the time. When it is
set to AM/PM, for example 1:00 PM will be dis­
played.
l l T he Qi standard enables you to charge your mobile phone
wireless Ly.
214
24h,
for example
Date format
When this option is set to DD.MM.YYYY, for ex­
ample 31.03.2019 will be displayed as the date.
When it is set to MM/DD/YYYY, for example
03/31/2019 will be displayed. When it is set to
YYYY-MM-DD, for example 2019-03-31 will be
displayed.

MMI settings

I I
► Select: MENU button >Settings> left control
button > MMI settings.
Language
You can change the language of the display along
with the language of the navigation cues* and
the speech dialogue system*.
Measurement units
Where available, the following measurement
units can be set: Speed, Distance, Temperature,
Consumption, Capacity and Pressure.
Reminder signal
Applies to: vehicles with Audi phone box
Important: Your mobile phone must be Qi com­
patible 1 ) , or it must be connected to the Audi
qpoge 151, Fig. 153
music interface (D
USB adapter cable.
When the reminder signal function is switched
on, you will be notified that your mobile phone is
still in the Audi phone box when you are leaving
the vehicle. You can choose between spoken,
sound and off.
Reminder signal volume: You can adjust the vol­
ume of the reminder signal by turning the rotary
push button.
Switch off pop-up: When this function is switch­
ed on�, the messages about the charging status
of the mobile phone in the Audi phone box will
not appear on the infotainment display. The re­
minder not to forget the mobile phone when
leaving the vehicle will also be switched off.
using a
►