Bluetooth Audio Player - Audi TT 2019 Owner's Manual

Playing from the jukebox
Important: The jukebox must contain audio/
video files q page 196, Filling the jukebox.
The jukebox is called up and operated via the
page 203, Fig. 177.
MMI (D
q
Displaying the jukebox memory capacity
Select: right control button > Jukebox memory
capacity. Information on the jukebox memory ca­
pacity and the number of stored tracks will be
displayed.
Deleting tracks from the jukebox
Important: The jukebox must contain audio/
video files.
- Delete entry: Select an entry from the jukebox's
media centre. Select: right control button> De­
lete from jukebox > This entry or Entire list.
- The status of the deletion process will be
shown on the MMI. During the deletion process
the playback of the jukebox is interrupted; it is
started again automatically once the deletion
process has been completed.
CD
CAUTION
Only copy audio/video files while the engine is
running; otherwise the vehicle battery will be
discharged.
.
Note
1
- For legal reasons it is not possible to copy
tracks from audio CDs onto the jukebox.
- Files that have already been copied are de­
tected automatically and cannot be copied
to the jukebox again.
- It is not possible to play audio/video files*
in the CD/DVD* drive while they are being
copied.
- For legal reasons there is no export function
for the jukebox.
- Files or tracks that do not include stored
metadata are listed as Unknown. Audi rec­
ommends that you mark the audio files with
the corresponding metadata (e.g. ID3 tags).
u
<(
0
N
I'-.
N
......
0
......
l l N ot in the
Playback
l/)
co
1 >
view.
- When handing over your vehicle e.g. to a
new buyer, reset the jukebox to the factory
settings q page 215.

Bluetooth audio player

Applies to: vehicles with Bluetooth audio player
You can use the Bluetooth audio player to play
music from your Bluetooth-enabled device (e.g.
smartphone) wirelessly via the MMI.
Important: The vehicle must be stationary, and
the ignition must be switched on. The Bluetooth
settings must be open on your mobile device dur­
ing the connection procedure. The Bluetooth
function and the discoverability option of the
MMI system q page 217 and the mobile device
must be activated. The Bluetooth audio player
page 217 must be switched on in the MMI.
q
- To connect a Bluetooth device: Press the
I MEDIAi button. Press the left control button
repeatedly until the source overview is dis­
played. Select and confirm Bluetooth audio
player page 203, Fig. 178.
®
q
- You may need to select and confirm Not con­
nected > Connect Bluetooth audio player. The
system will start searching for Bluetooth devi­
ces. Follow the instructions given by the MMI.
- Select and confirm the desired Bluetooth device
from the list. The MMI will generate a PIN to
establish the connection .
- Select and confirm Yes.
- Enter the PIN on your Bluetooth device to es-
tablish a connection, or if the PIN is already be­
ing displayed on your Bluetooth device, please
confirm it on the device. You have about 30 sec­
onds to enter the PIN.
Depending on the device you are using, the media
are started and operated using the mobile device
or the MMI.
i
Note
- Pay attention to any connection queries on
your Bluetooth device.
Media
►
197