Introduction; Spectre 3.0 Dual Loop Side Panel & Dual Loop Side Panel Dark; Spectre Integra-M Dual Loop Side Panel & Dual Loop Side Panel Dark - SINGULARITY COMPUTERS SPECTRE 3.0 Assembly Manual

Spectre 3.0 & Spectre Integra – M
Dual Loop Side Panel Assembly Manual

Introduction

Spectre 3.0 Dual Loop Side Panel & Dual loop Side Panel Dark
The Spectre 3.0 Dual Loop Side Panel is an addon for any version of Spectre 3.0 including all
limited editions and Spectre 3.0 Integra. Essentially it is a mirror image of the main distribution
plate, but with some port location and design changes to allow for one loop for the CPU, and one
for the GPU/s. It is a replacement for the side panel window and mounts directly onto the side
panel window mounts, along with an extra stand-off which attaches to the rear IO panel. It is
designed to be as open as possible so that you can still see the most important parts of the build.
The distribution plate section only really covers the sides of the radiators and fans which is like
traditional windowed case side panels. It has a removable side panel, so it is easy to gain access
to the case for loop building. It has an integrated D5 pump top, Protium 2.0 Pump Cover and two
ARGB LED strips which come pre-installed. There are 4 ports which are positioned for the GPU
loop and top radiator, and a fill and drain port. The main distribution plate layout works perfect
for the CPU loop connected to the front radiator. The Spectre 3.0 Dual Loop Side Panel can be used
in dual loops, single loop series or parallel, there are many options.
We have created two versions. The Spectre 3.0 Dual Loop Side panel is designed for the non-
limited versions of Spectre 3.0 and is built from clear acrylic. The Spectre 3.0 Dual Loop Side Panel
Dark is designed for the limited-edition versions of Spectre 3.0 and has a 3mm Satin Black acrylic
cover which is removable, a clear acrylic top layer and a grey tinted main rear layer.
The idea for the Spectre 3.0 Dual Loop Side Panel came from one of our customers. We were
working on customisation with the customer for his Spectre 3.0 Integra Umbra Limited Edition.
He was looking for ways to shroud the radiators and also add dual loops. After going through a
few different ideas, we ended up with a concept for a distribution plate which attaches to the side
panel window mounts of Spectre 3.0 and adds a second loop. We like to engage with our
customers as much as possible to improve our products but this also often leads to inspiration
and new ideas.
Spectre Integra-M Dual Loop Side Panel & Dual loop Side Panel Dark
The Spectre Integra-M Dual Loop Side Panel is an addon for any version of Spectre Integra-M
including Spectre Integra-MA. Essentially it is a mirror image of the main distribution plate, but
with some port location and design changes to allow for one loop for the CPU, and one for the
GPU/s. It is a replacement for the side panel window and mounts directly onto the side panel
window mounts, along with an extra stand-off which attaches to the rear IO panel. It is designed
to be as open as possible so that you can still see the most important parts of the build. The
distribution plate section only really covers the sides of the radiators and fans which is like
traditional windowed case side panels. It has a removable side panel, so it is easy to gain access
to the case for loop building. It has an integrated D5 pump top, Protium 2.0 Pump Cover and two
ARGB LED strips which come pre-installed. There are 4 ports which are positioned for the GPU
loop and top radiator, and a fill and drain port. The main distribution plate layout works perfect
Revision 1.0 Page | 2