Creating Sequence Steps - PRICOM Design Layout Lighting Solution User Manual

Layout Lighting Solution – Software and Configuration

5.8 Creating Sequence Steps

Let's go to Sequence Step 2 and perform a fade into a Scene and Preset. See the flowing
screen:
In this screen, we have selected Sequence One, then Sequence Step #2. The Sequence
Step notes were changed to "Fade to Day in 5 Secs", so we will configure for that action.
In the Sequence Step Action area, click the Function pull-down, select "Lighting Preset"
and set the Fade Time to 5 (seconds). This will reveal the Scene and Preset list below the
Step Action list.
Now we can select ANY Scene and Preset to fade to. To keep things simple, we will
select our Test Scene, and the Day Preset. This Sequence Step Action will cause the start
of a 5 second fade to the Test Scene Day Preset.
Layout Lighting Solution – User Manual
Page 33