Table of Contents
Advertisement
Fans
Removing the left fan
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the left fan and provides a visual representation of the removal procedure.
Steps
1. Disconnect the left-fan cable from its connector on the system board.
2. Remove the two screws (M2x3) that secure the left fan to the palm-rest and keyboard assembly.
3. Lift the left fan off the palm-rest and keyboard assembly.
Installing the left fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the left fan and provides a visual representation of the installation procedure.
Before working inside your
computer.
Removing and installing Customer Replaceable Units (CRUs)
Before working inside your
47
Advertisement
Table of Contents
