4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the speakers.
7. Remove the
power-adapter
8. Remove the
I/O
board.
9. Remove the
left fan
and the
10. Remove the
discrete heat sink
11. Remove the
power-button
12. Remove the
power button with optional fingerprint
13. Remove the
system
board.
NOTE:
For configurations with integrated graphics, the system board can also be removed and installed with the heat
sink and M.2 sold-state drive attached.
14. Remove the touchpad.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
port.
right
fan.
(if applicable).
board.
reader.
Removing and installing Field Replaceable Units (FRUs)
83