Dell Inspiron 14 Plus 7430 Owner's Manual page 86

NOTE: For configurations with integrated graphics, the system board can also be removed and installed with the heat
sink and M.2 sold-state drive attached.
3. Install the discrete heat sink
NOTE: If either the system board or the heat sink is replaced, use the thermal grease provided in the kit to ensure that
thermal conductivity is achieved.
4. Install the power button with optional fingerprint
5. Install the power-button
6. Install the left fan and the
7. Install the I/O board.
8. Install the power-adapter
9. Install the speakers.
10. Install the display assembly.
11. Install the wireless card.
12. Install the battery.
13. Install the base cover.
14. Follow the procedure in
86 Removing and installing Field Replaceable Units (FRUs)
(if applicable).
board.
right fan.
port.
After working inside your
reader.
computer.