Table of Contents
Advertisement
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
M.2 2230 solid-state drive
5. Remove the
wireless
card.
6. Remove the
left fan
and the
7. Remove the
integrated heat sink
About this task
The following image indicates the connectors and M.2 card slots on your system board.
1. Power-button cable connector
2. Power-adapter port cable connector
3. Display-assembly cable connector
4. Right fan cable connector
5. Battery cable connector
6. Keyboard cable connector
7. Keyboard-backlight cable connector
8. M.2 solid-state drive card slot
9. M.2 wireless-card slot
10. Speaker cable connector
11. Touchpad cable connector
12. I/O-board cable connector
13. Left fan cable connector
The following image(s) indicate the location of the system board and provides a visual representation of the removal procedure.
74
Removing and installing Field Replaceable Units (FRUs)
or the
M.2 2280 solid-state
right
fan.
or
discrete heat sink
drive.
Before working inside your
Advertisement
Table of Contents
