Fans; Removing The Right Fan - Dell G15 5510 Service Manual

Steps
1. Place the power-adapter port into the slot and adhere the power-adapter port cable on the system board.
2. Connect the power-adapter port cable to the system board.
3. Align and place the power-adapter port bracket over the power-adapter port.
4. Replace the two screws (M2x4) to secure the power-adapter port bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the rear cover
2. Install the base cover.
3. Follow the procedure in

Fans

The following procedure of removing and installing fans are applicable only on computers that are shipped with NVIDIA GeForce
GTX 1650.

Removing the right fan

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the rear cover.
About this task
The following image indicates the location of the right fan and provides a visual representation of the installation procedure. The
orientation is based on the position of the fan when you are working on your computer.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 39