TSC PEX-2000 Series User Manual page 54

Set the action of the media when turning on the printer.
Feed: Printer will advance one label.
Media Power Up Calibration: Printer will make calibration.
Length: Printer determine length and feed label.
No Motion: Printer will not move media.
Set the action of the media when closing the printhead.
Feed: Printer will advance one label.
Head Close Calibration: Printer will make calibration.
Length: Printer determine length and feed label.
No Motion: Printer will not move media.
Label Top Adjust print position vertically on the label. Value range: -120 to +120 dots.
Left Position Adjust print position horizontally on the label. Value range:-9999 to +9999 dots.
Reprint Mode
Reprint the last label by pressing
Select the bitmap scaling factor. The first number is the original dots per inch (dpi) value;
Format Convert
the second the dpi which you would like to scale.
Note: printing from other software/drive will overwrite the settings set from the panel.
button on printer's control panel.
No Motion
No Motion
0
0
Disabled
None
52