TSC PEX-2000 Series User Manual page 53

Item
Density Set the printing darkness. Available setting range: 0 to 30.
Print Speed Set the print speed.
Slew Speed Set feed speed
BackFeed Speed Set back speed
Tear Off Adjust media stop location. Available setting value range: -120~120 dots.
Set the print mode. There are 4 modes in total:
Tear Off: Once finishing the printing process, label will be fed to the tear plate location.
Print mode Applicator: The printer prints a label when it receives a signal from the applicator.
Stream:: The print engine prints a batch of labels with backfeed occurring only at the start
and end of the batch instead of between individual labels.
Rewind: Enable the label rewinder mode.
Print Width Set the print width. Available setting range: 2 ~ 999 dots.
List Fonts Print the current fonts list from the memory devices to the label.
List Images Print current printer available images list stored at the memory device to the label.
List Formats Print current printer available formats list from the memory devices to the label.
List Setup Print current printer configuration to the label.
Control Prefix Set control prefix character.
Format Prefix Set format prefix character.
Delimiter Char Set delimiter character.
Description Default
16
203 dpi: 6
300 dpi: 4
203 dpi: 6
300 dpi: 4
2
0 dot
Tear Off
812
N/A
N/A
N/A
N/A
N/A
N/A
N/A
51