Compaq 5525B User Manual page 58

Chapter 3
Operational Procedures
6. Install the new ribbon:
a. With the ribbon to the outside, place the full spool on the right
b. Thread the ribbon around the ribbon guide (4) and along the
CAUTION
The ribbon must not be twisted. A twisted ribbon can lower print
quality, shorten ribbon life, or cause paper jams.
c. Place the empty spool on the left hub. Press down on the spool
d. Hand turn the empty spool to make sure the ribbon tracks
58
hub (3). Press down on the spool until the hub latch snaps in
place.
3
ribbon path. (Refer to the ribbon path diagram on the shuttle
cover.) Be sure to thread the ribbon between the hammer bank
cover and the ribbon mask.
until the hub latch snaps into place.
correctly in the path and ribbon guides.
4