Table of Contents
Advertisement
Chapter 5
Configuring The Internal Ethernet Adapter For Novell
Table 11. PSERVER Setup (Pre-NetWare 4) (continued)
Step
11.
Select PRINT SERVER
CONFIGURATION.
12.
Select PRINTER CONFIGURATION.
13.
Select the first item listed as NOT
INSTALLED and press <Enter>.
14.
Type in the name of one of the eight
default destinations on the unit for the
Name field (e.g. d1prn, d2prn, etc.) and
go to the Type field.
15.
Press <Enter> at this field and then
select DEFINED ELSEWHERE.
16.
Press <Escape> and select Yes to
save changes.
17.
Press <Escape> again.
18.
Select QUEUES SERVICED BY
PRINTER.
19.
Select one of these printers.
20.
Press <Insert>.
21.
Select the queue created earlier to
service this printer and press <Enter>.
22.
Press <Enter> to select the default.
This is fine for most cases.
23.
Press <Escape> back to Main Menu
176
Action
Result of Action
This menu displays.
A list of configured printers is
displayed.
The PRINTER N CONFIGURATION
window comes up where N equals the
selected printer.
Cursor sits at the Type field with a
printer name now assigned.
Comes back to the PRINTER N
CONFIGURATION window.
Gives you the option to define more
printers.
Returns to PRINT SERVER
CONFIGURATION menu.
A list of defined printers displays.
A list of queues comes up. It will be
empty the first time you use it.
Displays a list of available queues.
Asks for a priority.
Comes back to queue list.
Main Menu displays.
Advertisement
Table of Contents
