Table of Contents
Advertisement
Table 12. RPRINTER Setup (Pre-NetWare 4) (continued)
Step
Action
14.
Press <Escape> until you are at the
PRINT SERVER CONFIGURATION
menu again.
15.
Select QUEUES SERVICED BY
PRINTER.
16.
Select the printer you previously
defined and press <Enter>.
17.
Press <Insert>.
18.
Select the queue you want this printer
to service and press <Enter>.
19.
Press <Enter> to use the default.
20.
Press <Escape> until you have exited
PCONSOLE.
21.
Start PSERVER.
22.
In SYS VOLUME on the file server,
change to the \LOGIN directory.
23.
Create a directory named after the
Internal Ethernet Adapter. By default,
this will be M_ xxxxxx where xxxxxx
equals the last six digits of the unit's
Ethernet address (e.g. M_000BF5)
24.
Within this directory, create a file called
CONFIG and open it for editing.
RPRINTER Setup (Pre-NetWare 4)
Result of Action
Displays this menu.
A list of defined printers for this print
server is shown.
An empty queue list comes up.
A list of available queues displays.
Prompts you for a priority.
Returns to the queue list.
Takes you to the command prompt.
Starts the PSERVER so the Internal
Ethernet Adapter can service it as an
RPRINTER.
You will be at this prompt.
Creates the directory.
A blank file displays.
179
Advertisement
Table of Contents
