Table of Contents
Advertisement
UM1050
4
4.1
Downloaded from
Elcodis.com
electronic components distributor
STM32W-RFCKIT utilities and software tools
stm32w_flasher utility
The stm32w_flasher utility allows you to download a binary file into the STM32W-RFCKIT
RF control kit's boards. This utility comes with the Simple MAC software installer file.
To download a binary image, follow these steps:
1.
Connect the kit board to a PC USB port.
2.
Using the mouse, right-click on My Computer, select Manage, Device Manager, and
open Ports (COM & LPT) to display the related USB COMx port.
3.
Open a DOS Window on your PC and go to the utilities folder which is created after the
installation process.
4.
Type the following command:
stm32w_flasher -p <COMx> -r -f <file_name.bin/.s37>
where COMx is the virtual COM related to the connected application board, and
file_name.bin/.s37 is the application image to be downloaded.
STM32W-RFCKIT utilities and software tools
Doc ID 18433 Rev 2
11/17
Advertisement
Table of Contents
Need help?
Do you have a question about the STM32W-RFCKIT and is the answer not in the manual?
Questions and answers