Other Matrox Axio Hd Workflows; 720P Workflow Example - Matrox Axio Installation And User Manual

Hide thumbs Also See for Axio:
Table of Contents

Advertisement

275

Other Matrox Axio HD workflows

720p workflow example

Matrox Axio supports creating 720p sequences at 23.98 fps, 25 fps, 29.97 fps,
50 fps, and 59.94 fps. The compression formats that you can capture and export
depend on your sequence's video format (for details, see
"Supported video
compression formats"
on page 281).
If you're working with a 720p @ 23.98 fps or 25 fps sequence, Matrox Axio
supports capturing Panasonic VariCam material (you must select Enable VariCam
capture
when you perform the capture). In this case, Axio will remove the
redundant frames from the VariCam input during capture and create a clip in the
same format as your sequence for editing.
You can also import supported .mxf and .mp4 files for realtime playback, such as
Panasonic P2 720p .mxf files and Sony XDCAM EX 720p .mp4 files. When needed,
Matrox Axio will convert the clips to your sequence's video format by removing the
redundant frames when the .mxf files are played back on the timeline.
Depending on your sequence's video format, you can export your sequence to tape
as 720p @ 50 fps or 59.94 fps video, or downconvert the video to NTSC or PAL.
¦ Note
SDI and analog component input is not supported for 720p @ 23.98 fps, 25
fps, and 29.97 fps sequences.
Other Matrox Axio HD workflows

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Axio and is the answer not in the manual?

Table of Contents