11. TECHNICAL INFORMATION ..........15 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind.
ENGLISH SAFETY INSTRUCTIONS Before the installation and use of the ap- • Always use a correctly installed shock- pliance, carefully read the supplied in- proof socket. structions. The manufacturer is not re- • Do not use multi-plug adapters and ex- sponsible if an incorrect installation and tension cables.
– Bed and breakfast type environ- ted. There can be detergent on the ments. dishes. • The appliance can release hot steam if WARNING! you open the door while a programme Risk of injury, burns, electrical operates. shock or fire.
ENGLISH Cutlery basket • When the programme is completed, the green light comes on. Lower basket • When the appliance has a malfunction, Upper basket the red light flashes. The Beam-on-Floor goes off 2.1 Beam-on-Floor when the appliance is deactiva- ted.
ENGLISH 2. Make sure that the salt container and cators of function buttons (A), (B) and the rinse aid dispenser are full. (C) start to flash. 3. Start the shortest programme with a 3. Press function button (C), rinsing phase, without detergent and •...
ENGLISH 6.2 Filling the salt container Turn the cap counterclockwise and open the salt container. Put 1 litre of water in the salt contain- er (only for the first time). Fill the salt container with dishwasher salt. Remove the salt around the opening of the salt container.
10 www.electrolux.com 5. Set and start the correct programme for the type of load and the degree of soil. 7.1 Using the detergent Press the release button (B) to open the lid (C). Put the detergent in the compartment (A) .
ENGLISH Make sure that there is detergent ance after some minutes. This in the detergent dispenser before helps to decrease the energy con- you start a new programme. sumption. At the end of the programme Important • Let the dishes become cold before you When the programme is completed, an remove them from the appliance.
12 www.electrolux.com • Make sure that the spray arms can • The position of the items in the baskets move freely before you start a pro- is correct. gramme. • The programme is applicable for the type of load and for the degree of soil.
ENGLISH Assemble the filter (A) and put it into position in filter (B). Turn it clockwise until it locks. An incorrect position of the filters can cause bad washing results and damage to the appliance. Only use neutral detergents. Do not use 9.2 Cleaning the spray arms abrasive products, abrasive cleaning pads Do not remove the spray arms.
14 www.electrolux.com Problem Possible solution You cannot activate the appli- Make sure that the mains plug is connected ance. to the mains socket. Make sure that there is not a damaged fuse in the fuse box. The programme does not start.
ENGLISH ance is in setting mode, refer to ‘Set- • The end indicator is off. ting and starting a programme'. 4. Press function button (B). 2. Press and hold function buttons (B) • The end indicator comes on. The and (C) at the same time until the indi- rinse aid dispenser is active.