Table of Contents
Advertisement
IPX4
dust and water protection rating
Electrolux (Shanghai)
manufacturer
Professional Appli-
ance Co, Ltd
The dataplate is located in front panel of the equipment.
WARNING
Do not remove, tamper with or
make
the
illegible.
IMPORTANT
When scrapping the machine, the marking must be
destroyed.
NOTE!
Refer to the data given on the machine marking for
relations with the Manufacturer (e.g. when ordering
spare parts, etc.).
C.4
Appliance identification
C.4.1
How to identify the technical data
• Read the factory description of the product (F. Mod.) on the
dataplate;
• identify the main machine data;
• consult E.1 Main technical characteristics paragraph.
26
machine
marking
C.4.2
How to interpret the factory description
The factory description on the dataplate has the following
meaning (some examples are given below):
(1)
(2)
E
FTD
E
FTD
E
FTD
E
FTD
E
FTD
E
FTD
Variable description
(1) Brand
E = Electrolux
(2) Machine type
FTD = Flight Type Dishwasher
(3) Dishes/hour
052 = 5200 dishes/hour
064 = 6400 dishes/hour
082 = 8200 dishes/hour
108 = 10800 dishes/hour
(4) Supply
E = electric
S = steam
(5) Drying unit
1 = one dryer
2 = two dryers
C.5
Responsibility
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-original
spare parts and accessories can negatively affect machine
operation and invalidates the original manufacturer
warranty);
• operations carried out by non-specialised personnel;
• unauthorized modifications or operations;
• missing, lack or inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and / or untrained
personnel;
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
(3)
(4)
(5)
052
E
1
082
S
1
1081
E
1
108
E
1
1081
S
1
108
S
1
Advertisement
Table of Contents
