Philips AUT7006 User Manual page 9

c. Connect the water outlet and the faucet
After you measure the length of the 1/4"
pipe you need to connect the system and
the faucet, cut the 1/4" pipe with a pipe
cutter. Insert one end of the pipe into a
quick connect �tting, and connect the
quick connect �tting on the stem of the
faucet. Insert the other end of the 1/4"
pipe into the �ltered water outlet hole in
the back of the system until it stops.
Use a clip to secure the pipe at the hole.
d. Connect the drain water outlet and the drain connector
Identify the drain outlet location. Drill a 6.5mm hole on the drain pipe. Install the drain
connector according to the diagram. Securely tighten the nuts. Cut a section of 1/4" pipe.
Insert one end of the pipe into the drain outlet hole in the back of the system until it stops.
Use a clip to secure the pipe at the hole. Insert the other end of the pipe into the drain
connector.
(2)
(3)
7
RO �ltered water
Clip
Quick connect �tting
RO �ltered water
outlet pipe
(1)