Brickcom Mini Dome Series Manual page 11

7.1 EasyConfig
To launch EasyConfig, select EasyConfig from the start menu. If Complete
Setup type was used in the software installation, an EasyConfig icon was
installed on the desktop. Double click to open the icon.
If Custom Setup type was used in the software installation and an
EasyConfig icon was not installed on the desktop, the program will be
installed under C:\Program Files\Brickcom\EasyConfig unless the program
was saved to a preferred directory.
I. Click <Start> to continue. The program will automatically search for
the camera in the intranet.
NOTE - Check "Skip the hardware installation guide" to skip
checking the hardware connection. To check the hardware
installation settings, do not check the option box.
II. Select either "Simple Mode" or "Professional Mode" to obtain the
camera's IP settings. If "Simple Mode" is selected, EasyConfig will set
up the connection automatically. If "Professional Mode" is selected, the
user will need to configure the IP settings manually.
III. There may be many cameras in the local network. Differentiate the
cameras using their UPnP name. Double click on the camera from the
survey list to connect.
11