3.2
System Power Paths
There are two power supply paths for the system. One is through a buck converter (Richtek RT6276A), which convert 12V
(DC Jack) to 4.2V (VSYS). This path supports those applications without Li-Polymer batteries.
The other is through a battery charger IC (Richtek RT9471D). This path supports those applications with Li-Polymer
batteries.
12V+/-5%
CN1000
IDJ-D47B2
IDJ-D47B2
1
2
3
3.2.1
Charger Power Source
The user can choose USB type C or DC12V to power the charger ICs by J1003. Usually, any one of them can meet the
requirement for most cases.
Current Rating
3 Ampere
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
USB
Type C
J1003
ME_SIP-3P
1
1
2
2
3
3
Figure 3-1. System Power Path
Figure 3-2. Jumper Selection for Charger Power Source Input Path
Buck
RT6276A
Charger
RT9471D
+
BT1
V
BATTERY
-
Charger Power Source
Genio 700 EVK
Genio 700 EVK Hardware User Guide
J1000, J1001
VSY S
ME_SIP-3P
1
1
2
2
3
3
13