Advertisement
(7) Remove the DOJ from the rear differential
by using ST.
NOTE:
When removing the DOJ from rear differential, fit
ST to the bolts as shown in the figure so as not to
damage the side bearing retainer.
ST 208099PA100 DRIVE SHAFT REMOVER
(A) Bolt
9) Suspend the rear drive shaft to the rear cross-
member using wire.
REAR DIFFERENTIAL SIDE OIL SEAL
DI-00206
DI-00053
DI-51
10) Remove the oil seal using ST.
ST 398527700
PULLER ASSY
ST
11) Drive in a new side oil seal using ST.
NOTE:
Apply chassis grease between the oil seal lips.
ST 398437700
DRIFT
ST
12) Insert the DOJ into rear differential.
(1) Install the ST to rear differential.
ST 28099PA090 SIDE OIL SEAL PROTEC-
TOR
ST
(2) Install the spline shaft until the spline portion
is inside the side oil seal using ST.
DIFFERENTIALS
DI-00208
DI-00209
DI-00325
Advertisement
