Advertisement
REAR DIFFERENTIAL FRONT OIL SEAL
DIFFERENTIALS
15) Install the companion flange.
NOTE:
Use a plastic hammer to install the companion
flange.
16) Tighten the self-locking nut within the specified
torque range so that the preload of companion
flange becomes the same as that before replacing
oil seal.
Except STi model
ST 498427200
FLANGE WRENCH
STi model
ST 18633AA000 WRENCH COMPL
NOTE:
Use a new self-locking nut.
Tightening torque:
181 N·m (18.5 kgf-m, 134 ft-lb)
ST
DI-00199
17) Hereafter, reassemble in the reverse order of
disassembly.
18) Fill the differential carrier with gear oil to the
bottom of filler plug hole after installing. <Ref. to DI-
19, Differential Gear Oil.>
DI-49
Advertisement
