Advertisement
13) Extract the companion flange with a puller.
14) Fit a new oil seal with ST.
NOTE:
• Press-fit until the end of oil seal is 1 mm (0.04 in)
inward from end of carrier.
• Apply grease between the oil seal lips.
ST 498447120
INSTALLER
ST
15) Press-fit the companion flange with ST1, ST2
and ST3.
ST1 899874100
INSTALLER
ST2 399780104
WEIGHT
ST3 498937110
HOLDER DRIVE PINION
NOTE:
Be careful not to damage the bearing.
ST1
ST2
16) Install the self-lock nut. Then tighten it with the
ST.
REAR DIFFERENTIAL
DI-00072
DI-00089
ST3
ST2
DI-00323
ST 18633AA000 WRENCH COMPL
17) Install the crown gear on differential case.
NOTE:
Before installing the bolts, apply Lock Tite to bolt
threads.
Lock Tite:
THREE BOND 1324 (Part No.004403042) or
equivalent
NOTE:
Tighten diagonally while tapping the bolt heads.
Tightening torque:
105 N·m (10.7 kgf-m, 77.4 ft-lb)
18) Press-fit the side bearing onto differential case
with ST.
ST 398487700
ST
19) Assembling side retainer.
(1) Press-fit the side bearing outer race with
press and ST.
DI-41
DIFFERENTIALS
ST
DI-00071
DI-00068
DRIFT
DI-00095
Advertisement
