Advertisement
DIFFERENTIALS
5) Make right and left side bearing retainers in or-
der to identify them at reassembly. Remove the
side bearing retainer attaching bolts, set the ST to
differential case, and extract right and left side
bearing retainers with a puller.
NOTE:
Each shim, which is installed to adjust the side
bearing preload, should be kept together with its
mating retainer.
ST 398457700
ATTACHMENT
ST
6) Pull out the differential case assembly from dif-
ferential carrier.
NOTE:
Be careful not to hit the teeth against the case.
7) When replacing the side bearing, pull the bear-
ing cup from side bearing retainer using ST.
ST 398527700
PULLER ASSY
REAR DIFFERENTIAL
8) Extract the bearing cone with ST.
NOTE:
• Do not attempt to disassemble the parts if unnec-
essary.
• Set the puller so that its claws catch the edge of
bearing cone.
• Never mix up the right and left hand bearing rac-
es and cones.
ST 18759AA000 PULLER ASSY
DI-00064
9) Remove the crown gear by loosening the crown
gear bolts.
NOTE:
Disassembling the differential case is not allowed.
DI-00065
10) Hold the companion flange with ST and remove
the drive pinion nut.
ST 18633AA000 WRENCH COMPL
ST
DI-00066
DI-28
ST
DI-00316
DI-00068
ST
DI-00071
Advertisement
