Advertisement
DIFFERENTIALS
4. Rear Differential
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Move the select lever or gear shift lever to "N".
4) Release the parking brake.
5) Loosen the wheel nuts.
6) Jack-up the vehicle and support it with sturdy
racks.
7) Remove the wheels.
8) Disconnect the connector from oil temperature
switch. (STi model)
(A) Connector
9) Remove the rear exhaust pipe and muffler.
SOHC model
<Ref. to EX(H4SO)-8, REMOVAL, Rear Exhaust
Pipe.> and <Ref. to EX(H4SO)-9, REMOVAL, Muf-
fler.>
DOHC Turbo model
<Ref. to EX(H4DOTC)-13, REMOVAL, Rear Ex-
haust Pipe.> and <Ref. to EX(H4DOTC)-14, RE-
MOVAL, Muffler.>
10) Remove the heat shield cover. (If equipped)
11) Remove the front cover of rear differential
mount.
12) Remove the propeller shaft. <Ref. to DS-14,
REMOVAL, Propeller Shaft.>
13) Remove the rear differential protector. (If
equipped)
REAR DIFFERENTIAL
(A)
DI-00348
DI-00050
14) Remove the clamps and bracket of parking
brake cable.
15) Remove the DOJ of rear drive shaft from rear
differential using ST. <Ref. to DI-50, REPLACE-
MENT, Rear Differential Side Oil Seal.>
ST 28099PA100 DRIVE SHAFT REMOVER
(A) Bolt
16) Secure the rear drive shaft to rear crossmem-
ber using wire.
DI-22
DI-00051
ST
(A)
DI-00052
DI-00053
Advertisement
