Advertisement
DIFFERENTIALS
11) Draw out the pinion mate shaft and remove the
pinion mate gears, side gears and thrust washers.
(Model without LSD)
NOTE:
The gears as well as thrust washers should be
marked or kept separated right and left, front and
rear.
(A) Side gear
(B) Pinion mate gear
(C) Thrust washer
(D) Differential case
(E) Pinion mate shaft
12) Hold the companion flange with ST and remove
the drive pinion nut.
ST 498427200
FLANGE WRENCH
13) Extract the companion flange with a puller.
REAR DIFFERENTIAL
DI-00238
ST
DI-00071
DI-00072
DI-26
14) Press the end of drive pinion shaft and extract it
together with the rear bearing cone, preload adjust-
ing spacer and washer.
NOTE:
Hold the drive pinion so as not to drop it.
ST 398467700
DRIFT
15) Remove the rear bearing cone from drive pin-
ion by supporting the cone with ST.
NOTE:
Place the replacer so that its center-recessed side
faces the pinion gear.
ST 398517700
REPLACER
16) Remove the front oil seal from differential carri-
er using ST.
ST 398527700
PULLER ASSY
ST
DI-00073
ST
DI-00074
DI-00075
Advertisement
