Turning the Computer On
To turn the computer on, slide the power switch and release it.
If the computer is only connected to external AC power, the
computer will start up automatically when you plug it in.
Setting Up the Software
When you begin software setup, online instructions guide you
through the setup process.
IMPORTANT:
entire process. Make sure the computer is plugged into an external
power source to ensure that software setup is not interrupted.
CAUTION:
software drivers are installed
1-4 Getting Started
After you begin software setup, you must complete the
To prevent file corruption and ensure the correct
Do not dock the computer in a docking station.
Do not turn off or unplug the computer or remove a drive during
software setup.