Removing Drivelock Protection; Power-On Password; Using The Power-On Password - Compaq Armada M700 Series Reference Manual

Removing DriveLock Protection

You must know the master password to delete the user
NOTE:
password. If you open Computer Setup from a Windows restart,
DriveLock settings are not accessible.
1. Run Computer Setup.
2. Select the Security Menu with the right or left arrow key.
3. Select DriveLock Protection and press
4. Select the drive you want to remove protection from and
press
5. Select Protection Disable.
6. Type your current master password.
7. Exit Computer Setup. Select FileÅSave changes and exit and
press
The changes will take effect when you exit Computer Setup.

Power-On Password

Using the Power-On Password

After you set the power-on password, you should enter it each
time you turn on or restart the computer.
If QuickLock/QuickBlank is enabled, you must enter the power-on
password every time you resume from Suspend or Hibernation.
When the power-on password prompt displays, enter your power-
on password.
If you type the password incorrectly, you are prompted to reenter
it up to three times.
.
F10
. When prompted to confirm your choice, press
Enter
.
Enter
Security 7-5
.
F10