Power Controls; Turning On The Computer - Compaq LTE 5000 Setup Manual

. . . . . . . . . . . . . . . . . . . . . . . . .

Power Controls

The power switch and other power controls initiate various actions
depending on the power state of the computer, as described in the
following table.
Control
Power switch
Suspend button
Fn
+
Suspend button
Display switch +
Suspend button

Turning On the Computer

After you have connected the computer to an external power source
or inserted a charged battery pack, turn on the computer by sliding
the power switch
Suspend button. The green power/suspend light is illuminated. (The
power/suspend light blinks when the computer is in Suspend.)
If you are using an external power source, the power icon on the
status panel turns on. If battery pack(s) are in the computer, the
battery gauge icon(s) on the status panel are illuminated. The
battery gauge icons indicate the amount of charge in battery
pack(s).
Whenever the computer is on or in Suspend, be sure the ventilation
intake and exhaust are both clear of any obstructions.
3-4 Basic Operating, Maintenance, and Travel Guidelines
Power Controls
Action
Turns computer on when it is off, in Suspend, or Hibernation.
Turns computer off when it is on.
Initiates Suspend when computer is on. Turns computer on
when it is off, in Suspend, or Hibernation.
Initiates Hibernation when computer is on. Exits Suspend
when computer is in Suspend.
Restarts the system.
t
o the right and releasing it or by pressing the
CAUTION: Be sure that the ventilation intake and exhaust are not
blocked when the computer is on. If the vents are blocked, the computer
may overheat and unexpectedly initiate Suspend (or turn off when
docked).