Deleting the Power-On Password
To delete your password, type in the old password and the
keyboard password symbol, then press
Refer to "Keyboard Password Symbols" later in this chapter.
Setup Password
Setting the Setup Password
The setup password prevents unauthorized users from changing
your computer configuration through Computer Setup. Setup
passwords may also be used by network administrators to protect
and access the configuration of computers in a network.
1. Run Computer Setup.
2. Select the Security Menu.
3. Select setup password and press
4. Type your setup password and type it again to verify it.
NOTE:
and setup passwords. Type carefully because the password
does not display as you type it.
5. Press
6. Exit Computer Setup. Select FileÅSave changes and exit and
press
CAUTION:
forget your setup password. Record the password and put it in a safe
place.
You can use the same password for both the power-on
.
F10
. When prompted to confirm your choice, press
Enter
You cannot change the computer configuration if you
.
Enter
.
Enter
.
F10
Security 7-7