During Operation - Beckhoff AL8200 Operating Instructions Manual

For your safety
Shut down and secure the machine or plant
Shut down the machine or plant. Secure the machine or plant
against being inadvertently started up.
Correctly ground electrical components or modules
Avoid electric shocks due to improper grounding of electrical compo-
nents or modules. Ground all conductive components according to
the specifications in the chapters "Electrical Installation" and "Me-
chanical Installation".
Keep the immediate environment clean
Keep your workplace and the surrounding area clean. Ensure safe
working.
Check safety pictograms
Check whether the designated pictograms are on the product. Re-
place missing or illegible stickers.
Observe tightening torques
Mount and repeatedly check connections and components, comply-
ing with the prescribed tightening torques.
Avoid spalling of the sealing compound due to hard knocks
In case of improper use or due to hard knocks, the sealing com-
pound can spall and the product can be damaged.
Use the original packaging only
Use the original packaging for dispatch, transportation, storage and
packing.

2.1.2 During operation

Do not work on live electrical parts
Ensure that the protective conductor is connected properly. Measure
the voltage on the DC link test contacts DC+ und DC-. Do not work
on the linear motor until the voltage has dropped below 50 V DC.
Never loosen electrical connections when live. Disconnect all com-
ponents from the mains and secure them against being switched on
again.
Do not touch hot surfaces
Check the cooling of the surfaces with a thermometer. Do not touch
the components during and immediately after operation. Allow the
components to cool sufficiently after switching off.
Version: 1.0 AL8200 ─── 15