Commissioning - Beckhoff AL8200 Operating Instructions Manual

Commutation and commissioning
9.2

Commissioning

32 ───
Exemplary commissioning
The procedure for commissioning is described as an example. A
different method may be appropriate or necessary, depending on
the application of the components.
Requirements for commissioning
Before commissioning the AL8200 MES, the following steps must
be completed:
• Mechanical and electrical installation
• Installation of the T5950 | TwinCAT 3 Drive Manager 2
The commissioning of the AL8200 MES is to be carried out as fol-
lows:
► Create new TwinCAT project
► If connected to target system, scan devices
► Accept message "HINT: Not all types of devices can be found
automatically" with "ok"
AL8200 Version: 1.0