It detects the magnetic field of the permanent magnets of the magnetic plates and supplies the encoder signals to the servo drive. Since the MES is a semi-absolute feedback system, no wake & shake is required in order to determine the commutation angle at machine start-up.
Guidelines and Standards Danger for persons, the environment or equipment The Magnetic Encoder System (MES) is not a product within the meaning of the EC Ma- chinery Directive. Operation of MES in machines or systems is only permitted once the ma-...
Check the completeness of the delivery against your delivery note. Missing parts or damage should be recorded immediately and reported to the carrier, the insurance and / or Beckhoff Automation GmbH & Co. KG. The standard scope of supply includes:...
Properties Properties The Magnetic Encoder System (MES) consists of a reader head with integrated analog Hall sensors. The Hall sensors evaluate the magnetic field of the magnetic plates and convert the signal into an analog output signal. Name Value / property...
Mounting Mounting The MES is installed behind or in front of the primary part, so that it moves with the primary part over the secondary part. Distance to the Rotation with respect Distance to the outside Screws Locating top side of the pri-...
Beckhoff's branch offices and representatives Please contact your Beckhoff branch office or representative for local support and service on Beckhoff products! The addresses of Beckhoff's branch offices and representatives round the world can be found on her internet pages: http://www.beckhoff.com You will also find further documentation for Beckhoff components there.