PXI-CORE Edge controller
2
About this manual
The purpose of this user manual is to provide the required information needed for the
installation (hardware and software) and access to the web-based Graphical User Interface of
the Bosch PXI‑CORE edge controller.
This manual, or an update, in pdf format is available as download from
www.boschsecurity.com.
2.1
Intended audience and use
This manual is intended for everyone who is authorized to install and configure the PXI‑CORE
edge controller and related products.
Intended use of the equipment
–
–
2.2
Copyright notice
Unless otherwise indicated, this publication is the copyright of Bosch Security Systems B.V. All
rights are reserved.
2.3
Trademarks
Throughout this document trademark names may have been used. Rather than put a
trademark symbol in every occurrence of a trademark name, Bosch Security Systems states
that the names are used only in an editorial fashion and to the benefit of the trademark owner
with no intention of infringement of the trademark.
2.4
Notice of liability
While every effort has been taken to ensure the accuracy of this document, neither Bosch
Security Systems nor any of its official representatives shall have any liability to any person or
entity with respect to any liability, loss or damage caused or alleged to be caused directly or
indirectly by the information contained in this document.
Bosch Security Systems reserves the right to make changes to features and specifications at
any time without prior notification in the interest of ongoing product development and
improvement.
Bosch Security Systems B.V.
The device may only be operated under the mounting and installation conditions specified
in this document.
The device may only use component configurations, software and firmware specified in
this document.
User manual
About this manual | en
7
2023-03 | V01 | F01U395004
Need help?
Do you have a question about the PXI-CORE Edge controller and is the answer not in the manual?
Questions and answers