Advertisement
Quick Links
Advertisement
Related Manuals for Water I.D. PoolLab 2.0
Summary of Contents for Water I.D. PoolLab 2.0
- Page 1 The new PoolLab 2.0 A presentation of and step-by-step guide to the new PoolLab 2.0...
- Page 2 In addition to Bluetooth, the PoolLab 2.0 now also offers WiFi in order to transfer the data directly to the cloud without having to go through the app. On the PoolLab 2.0 it is now also possible to directly select the water source for which the measurement is made...
- Page 3 8) PoolLab 2.0 The PoolLab 2.0 kit is also delivered "ready to use" and includes: PoolLab 2.0 photometer with built-in but exchangeable 3-fold cuvette 3 x AA batteries 3 x stirring rods (white/blue/red) 10ml syringe Storage bag 20 tablets phenol red (pH)
- Page 4 PoolLab 2.0 (ZERO step) Like the PoolLab 1.0, the PoolLab 2.0 photometer can be operated intuitively: 1) switch on 2) Open the three hinged covers of the light protection cover. 3) Add 10ml water sample to each chamber of the 3-fold cuvette (can be scooped; recommended: use syringe =exact 10ml).
- Page 5 PoolLab 2.0 (only one parameter) The following steps depend on whether the user wants to measure only one parameter or up to three parameters simultaneously. a) 1 parameter: Optional: The Sampling Point button can be used to select a measurement source under which the measurement result is to be saved.
- Page 6 PoolLab 2.0 (several parameters simultaneously) a) More than 1 parameter: Optional: The Sampling Point button can be used to select a measurement source under which the measurement results are to be stored. 7-9) use the three "T" keys (each assigned to one of the three cuvette parts) to select the parameters to be measured Note: T key 2 seconds = opens parameter selection menu.
- Page 7 A drop appears in the status bar instead of the tablets. Display: Here the display brightness can be set between 25% - 100%. The brighter, the higher the power consumption of the PoolLab 2.0. Calibr.: The PoolLab 2.0 can (in case of cuvette change: MUST) be calibrated by the user. No accessories are required for calibration...
- Page 8 (cuvette change) One of the advantages of the PoolLab 2.0 is that the (3-fold) measuring cuvette is permanently installed, but can also be changed. It is advisable to change the cuvette (spare part) if it is scratched, dirty or generally damaged in the area of the beam path (LED sensor).
- Page 9 Via WiFi, the measurement results can be transferred directly from the PoolLab 2.0 to the LabCOM Cloud at the touch of a button. The connection of the PoolLab 2.0 to a WiFi network as well as the setup of a cloud account must be done via the LabCOM app (Android and iOS), whereby the PoolLab 2.0 can be connected to the LabCOM app via Bluetooth.
- Page 10 (connection with the LabCOM App) Switch on the PoolLab 2.0 On the PoolLab 2.0 keyboard, briefly press the WiFi/Bluetooth button at the bottom right twice. Note: The Bluetooth symbol is now displayed in green in the status bar. 3) Start the LabCOM app 4) Press the menu icon (3 dashes, bottom right).
- Page 11 From this point on and provided that the WiFi network is accessible and a cloud account has been set up (next step), after pressing the WiFi symbol (on the PoolLab 2.0), the measurement data are automatically transferred to the cloud and are thus available in the app, the software and on the LabCOM website.
- Page 12 From this point on and provided that Wifi has been set up on the PoolLab (see previous page) and the WiFi network is accessible, after pressing the WiFi icon (on the PoolLab 2.0) the measurement data will automatically be transferred to the cloud and will thus be available in the app, the software and on the LabCOM...
- Page 13 Set up the cloud on the PoolLab 2.0 again. Note: If the cloud has already been set up on the PoolLab 2.0 and a WiFi connection has also been set up connection has been set up on the PoolLab 2.0, after transferring the sampling points on the PoolLab 2.0, the WIFi button must be pressed once to activate the...
- Page 14 LabCOM App Software Webend and Cloud The LabCOM family includes a LabCOM smartphone app for Android and iOS, LabCOM software for Windows and a LabCOM web app (browser), all connected and synchronised with the LabCOM cloud.
- Page 15 The one-time registration in the LabCOM Cloud activates the automated synchronisation between the LabCOM app/software/web application and the PoolLab 2.0. Synchronisation between PoolLab 2.0 and the LabCOM Cloud is one- way (upload and delete on PoolLab 2.0) Bluetooth synchronisation between the PoolLab 2.0 and the LabCOM app takes place in one direction (upload and delete on the PoolLab 2.0)
- Page 16 LabCOM App Software Webend and Cloud App (Android + iOS), software (Windows) and web end (all browsers) are almost identically structured, intuitive to use and, above all, free of charge for the user. In addition to creating water sources and managing the measurement results, you can also store your own chemicals and calculate dosing recommendations.