Performing A System Test; Displaying The Gps Status And Your Position - Blaupunkt TravelPilot RNS 3 Operating Instructions Manual

Set-up/Basic settings

Performing a system test

You can also perform a system test. This test will check the GPS antenna and
determine whether the back-up signal and the vehicle ignition are connected to
the system correctly.
Select the menu item SYSTEM TEST in the Set-up menu Install,
Follow the instructions given to you by the system and
Press the right-hand rotary/pushbutton ;.
After the system test has ended, the Set-up menu Install will appear automati-
cally.

Displaying the GPS status and your position

If you want to display the number of GPS satellites the system can current re-
ceive and your GPS position,
Select the menu item GPS STATUS in the Set-up menu Install
or
Activate the menu item GPS STATUS in the main navigation menu.
SVENSKA DANSK
Set-up menu Install
ENGLISH
251