Table of Contents
Advertisement
Radio operation
Manual station tuning
You can also select AM stations manually if you know their frequency. This is
useful if you would like to select a station which is not detected by automatic
seek tuning. For this to function properly, the >> symbol must appear beside
SEARCH in the tuner DSC menu.
Press << or >> on the rocker switch 2.
The frequency will change in 9 kHz increments.
Scan seek tuning
With Scan seek tuning you can search the entire waveband for stations within
your reception range. Each station detected will play for ten seconds. If you do
not interrupt Scan seek tuning, it will end automatically once it has run through
the waveband completely. Press note that, when the TA function is active, only
those stations which support the traffic information function (TP symbol in the
display) will be scanned.
Starting Scan seek tuning
To start Scan seek tuning,
Press TU A to access the functions menu for radio operation and
Press the softkey marked SCAN .
Scan seek tuning will begin. Symbols in the foreground of the display will indi-
cate the progress of Scan seek tuning.
Ending Scan seek tuning
If you want to end Scan seek tuning or continue listening to the station currently
being scanned,
Press ESC 9.
Scan seek tuning will end, the station selected last will continue to play.
Tuner functions menu
Main tuner menu, SCAN function active
190
Advertisement
Table of Contents
