Performing Basic Settings; Adjusting The Time Zone; Entering The Home Address; Activating The Pin Query - Blaupunkt TravelPilot Lucca 3.5 Operating And Installation Instructions

Performing basic settings

Performing basic settings
Before starting a route guidance, perform these
basic settings:
• Set the time zone of your position so that the
correct arrival times are displayed during the
navigation.
• You should enter your home address to quick-
ly navigate home from any location.
• Activate the PIN query to lock out unauthor-
ised persons from using the Lucca.

Adjusting the time zone

u
Touch the symbol in the main menu
of the Lucca.
The Settings menu is displayed.
u
Touch the symbol.
The Clock menu is displayed.
u
Touch the symbol.
A list with available time zones is
displayed.
u
Touch the time zone in the list that applies to
your current location.
Note:
The selection is facilitated by the display
of the capitols in the respective time zone.
"GMT" stands for Greenwich Mean Time, the
mean solar time at the Greenwich meridian
without considering daylight savings time.
u
Touch the symbol to activate (check
mark) or deactivate (no check mark)
daylight savings time.
Note:
If the time is changed at your position or if
you drive into a different time zone, you must
adjust the corresponding settings.
12
u
Touch the symbol to switch between
24-hour display (check mark) and
12-hour display (no check mark).
u
Touch the button to exit the menu
again.

Entering the home address

u
Touch the symbol in the main menu
of the Lucca.
The map is displayed.
u
Touch the symbol.
The Navigation menu is displayed.
u
Touch the symbol.
The Settings menu is displayed.
u
Touch the symbol.
The Destination Input menu is dis-
played.
u
Enter the address as described in the chapter
"Entering a destination address".
u
Touch the OK button.
The home address is saved.

Activating the PIN query

The PIN query allows you to lock out unauthorised
persons from using the Lucca. Hence, every time
you switch on the Lucca, the PIN (Personal Identi-
ty Code) you confi gured for yourself is requested.
The PIN can be changed at any time. If you should
forget the PIN, you can unblock the Lucca again
with the PUK (Personal Unblocking Key) which
you defi ne yourself. The PUK cannot be changed.
Note:
During the PIN entry, you have only 3 attempts
to enter the correct PIN or subsequently 3 at-
tempts to enter the correct PUK. If you enter
an incorrect PUK for the 3rd time, your device
is permanently blocked and the Lucca must
be returned via the Blaupunkt service.