Setting A Position Mark; Storing The Position Mark - Blaupunkt TravelPilot RNS 3 Operating Instructions Manual

Navigation

Setting a position mark

You can store your current vehicle position at any time, even during active route
guidance.
To store your current vehicle position,
Mark the menu item POSITION MARK in the DSC menu.
Press the right-hand rotary/pushbutton ;.

Storing the position mark

After you have pressed the right-hand rotary/pushbutton ;, a selection menu
will appear. Here you can choose whether you want to enter a name for the
position mark or return to the menu in which you set the position mark.
If you select the option SHORT N. and enter a name for the position mark, it will
be stored automatically in the destination memory.
Select the menu item SHORT N.
An edit menu which allows you to enter the short name will appear.
Enter a short name,
symbol and press the right-hand rotary/pushbutton ;, or
Select the
Press the right-hand rotary/pushbutton ; for longer than two seconds.
The position mark will be stored in the destination memory under the short name
entered.
If you select BACK , you will return to the menu in which the position mark was
set and the position mark will not be stored.
SVENSKA DANSK
DSC menu for navigation
Edit menu
ENGLISH
225