Table of Contents
Advertisement
Chapter 2 - Instructions and safety measures
Best practices
Table 2-1: Best Practices - DOs
DOs
Ensure there is an adequate space to access the Signal
Scout before selecting an installation position.
The Signal Scout must be installed vertically perpendicular
to the target structure (like beams, pipes, frames, etc) for
overall best performance.
Ensure the target surface of the structure is free from
greasy, corrosion, abrasion, and uneven surfaces. So, the
magnetic adapter attaches firmly to the target surface,
thereby improving the measurement of frequency
response.
Ensure there are no damages, pigments, dents, or
Contortion to the surface of the Signal Scout's base. Any
such deformations or pigments may affect performance
and measurement accuracy.
Ensure that there is no visible damage to the filter on the
face of the sensor, before installation. If the filter is
damaged then the sensor will not function as intended.
Dispose the Signal Scout and battery according to laws
and regulations.
Installation in an explosive environment must be under the
appropriate local, national, and international standards,
codes, and practices.
8
Advertisement
Table of Contents
