Daewoo DAT450 User Manual page 7

EN
NOTE:ADJUST THE TELESCOPIC TUBE TO PROPER LENGTH ACCORDING TO YOUR OPERATION
REQUESTS. THE TUBE CAN EXTEND AND SHORTEN WHEN YOU PRESS THE BUTTON BY PUS-
HING THE TUBE FORWARD AND BACKWARD.
WARNING:WHEN YOU ARE OPERATING:
1.Ensure that you are on a flat surface and have secure footing.
2.Check that the line touches or goes beyond the edge of the guard.
3.If the line is too short, pull on the nylon line and repeatedly press the spool button (9) until the line
reaches the edge of the guard. Pull the second line until it reaches the edge of the guard.
WARNING. For your own safety when adjusting the length of the line, avoid coming into contact with
the line cutting blade which is fixed to the guard. It is extremely sharp. Keep your hands well away
from this area.
SWITCHING ON AND OFF
1. Connect the cable to the power.
2. To switch on, you need to pull the safety lock-off button (4) forward in and then keep the switch
trigger (5) depressed.
4. To switch off, release the switch trigger
WARNING. The tool runs for approximately 5 seconds after it has been switched off. Let the
motor came to a complete stand still before setting the tool down.
EXTENDING THE LINE
To extend the line press the spool onto the ground whilst the motor is turning and the line will
extend automatically. For most effective grass trimming, ensure the machine is operation at full
speed and then use slow shallow sweeps of the line, ensuring that you do not overload the
machine by cutting too fast or cutting through heavy terrain.
EXTENDING THE TUBE
The telescopic tube can be adjusted from 0-18cm, you can adjust the length by yourself to get a
suitable position.
Fig 4
6