Windows Nt - 3Com EtherLink III User Manual

7 Click Cancel to leave each dialog box and return to
the Control Panel.
For information on peer-to-peer networking, see the
W95NDIS3.TXT file in the HELP directory on the
EtherDisk diskette.

Windows NT

This section describes how to install the network driver
in a PC running Windows NT versions 4.0 or 3.51.
Windows NT Version 4.0
Follow these steps to install the network driver in a PC
running Windows NT version 4.0:
1 Install the 3C509B NIC and connect it to the network
as described in Chapter 2.
2 Restart the PC.
3 Start Windows NT.
4 In the Control Panel, double-click Network.
5 In the Network window, select the Adapter tab.
If you have a NIC already installed, follow these steps:
a Select the existing 3Com NIC in the Installed
Adapters group.
b Click Remove.
c Click Yes in the Warning dialog box.
d Reboot the PC and repeat steps 3, 4, and 5.
6 Click Add Adapter.
7 In the Select Network Adapter window, select
Have Disk.
8 Insert the EtherDisk diskette in floppy drive A and in
the Insert Disk window, click OK.
9 In the Select OEM Option box, select
3Com EtherLink III ISA Adapter (3C509B).
10 Click OK.
11 In the Network Settings window, click Close.
If you are prompted for network information, contact
your system administrator for the requested information.
Windows NT prompts you for a reboot.
Windows NT 3-5