Table of Contents
Advertisement
EN
INSTALLATION
COMMISSIONING AND OPERATION
OF MS elite M5 MANUAL POWDER
APPLICATOR
† Before you begin the installation and commis-
sioning, take a moment to familiarize yourself with
the relevant manuals.
† Check that all components for mounting are
provided.
† A high quality of compressed air is necessary
for operation of the powder coating system.
!
† When connecting the powder spray applicator,
the control unit and the accessories, the controller
must be switched off by using the main switch.
!
† You must be familiar with the operation of this
device before switching it on.
† DO NOT touch the applicator nozzle when high
voltage is switched on.
† Do not stand in front of the spray applicator.
www.carlisleft.com
NOTE
CAUTION
CAUTION
Return To Contents
SAFE HANDLING OF THE
MANUAL POWDER APPLICATOR
1. Never point powder applicator at any person for any reason.
2. Persons with pacemakers may not at any time stand in the
area between the spray applicator and the coated work
piece. A high voltage field is present here.
3. In case of an issue, solve the issue as described in the
section Maintenance: Troubleshooting.
4. Comply with local regulations for occupational safety and
accident prevention regulations at all times.
5. Follow the information in this manual at all times, particularly
the general safety instructions and warnings.
21 / 40
INSTALLATION
PA-17-08-R6 (02/2022)
Advertisement
Table of Contents
