Advertisement
Quick Links
Yeast Harvester
Assembly, Operation, & Maintenance
Congratulations on your purchase and thank you for selecting the Yeast Harvester from
Blichmann Engineering™. We are confident that it will provide you years of service and
many gallons of outstanding beer. This manual will familiarize you with the use,
assembly, and the sanitation procedures for the product.
PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE
WARNING:
Sections labeled "Warning" can lead to serious injury or death if not followed. Please thoroughly read these sections
and understand them completely before use. If you do not understand them or have any questions, contact your
retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.
CAUTION:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of the equipment. Please
read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering
(www.BlichmannEngineering.com) before use.
IMPORTANT:
Sections labeled "Important" should specifically be followed to ensure satisfactory results with the product.
Brewing has inherent hazards and requires care, focus, and a mindset of safety and precaution. Hot liquids, steam, flame,
electricity, heavy lifting, slippery surfaces, cuts, and harsh chemicals to name a few.
•
Always thoroughly read and understand all product manuals before using the product.
•
Always keep children and pets safely away from the brewing area.
•
Always wear protective clothing, safety glasses/goggles, shoes, and burn/chemical resistant gloves.
•
Always use GFCI protected circuits for ALL electrical equipment.
•
Always keep flame away from flammable surfaces.
•
Always brew on hard surfaces such as concrete.
•
Always disconnect electrical equipment from power and propane tanks after each use.
•
Never lift hot and/or heavy liquids.
•
Never use drugs or alcohol while brewing.
•
Never leave the brewing area unattended.
Yeast Harvesting Kit
© Blichmann Engineering, LLC 2021
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
IMPORTANT INFORMATION
FOR IMPORTANT SAFETY INFORMATION!
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Blichmann Engineering Yeast Harvester
Summary of Contents for Blichmann Engineering Yeast Harvester
- Page 1 Blichmann Engineering (www.BlichmannEngineering.com) before use. CAUTION: Sections labeled “Caution” can lead to equipment damage or unsatisfactory performance of the equipment. Please read these sections thoroughly. If you have any questions, contact your retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use. IMPORTANT: Sections labeled “Important”...
- Page 2 Fermentor Configuration and Requirements A 1.5” triclamp valve is required to connect the Yeast Harvester to a fermentor. For best results, configure the valve in the vertical possition. The Yeast Harvester requires a minimum of 7.5” (191mm) of space below the fermentor’s bottom dump valve to operate.
- Page 3 Operation: Figure 2 Figure 1 Install the tube into the bottom of the yeast harvester body. Ensure the o-ring is seated on the ball This will direct the CO2 to the bottom of the bottle, ensuring lock post shown in figure 2.
- Page 4 A. Limited Warranty 1. Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required.
Need help?
Do you have a question about the Yeast Harvester and is the answer not in the manual?
Questions and answers